We are a major Exporter and Supplier of Trainer Kit (ARM9-2440). VPL-ARM9-2440 development board is for the Samsung S3C2440A processor and the use of professional power stable core CPU chip to chip and reset security permit system stability. This development board contain very detailed manual which will help you to quickly master in the development of embedded Linux.
Specifications
- Samsung S3C2440A microcontroller
- Operating speed up to 200 MHz
- SDRAM Memory :
- On-board 64 MB SDRAM
- 32-bit data bus
- SDRAM clock frequency up to 100 MHz
- FLASH Memory :
- On-board 64 MB NAND flash, Power-down non-volatile
- On-board 2 MB NOR flash, Power-down non-volatile, BIOS has been installed.
- LCD Display :
- On-board integrated 4-wire resistive touch screen interface, you can directly connect 4-wire resistive touch screen.
- Support for black and white, 4 gray-scale, 16 gray-scale, 256 color, 4096 color STN LCD screen size from 3.5" to 12.1", 1024x768 pixels screen resolution can be achieved.
- Support for black and white, 4 gray-scale, 16 gray-scale, 256 color, 64K color, True Color TFT LCD screen size from 3.5" to 12.1", 1024x768 pixels screen resolution can be achieved.
- Standard configuration for the NEC 256K coor 240x320/ 3.5" TFT True Color LCD screen with touchscreen.
- Leads to a 12V power supply on-board interface, for the large size TFT LCD 12V CCFL backlight module (inverting) power supply.
- Interface and Resources :
- 1 100 Mbps Fast Ethernet RJ-45 interface (used netork chips DM9000)
- 3 Serial ports
- 1 USB host
- 1 USB slave (B-type interface)
- 1 SD card storage interface
- 1 channel stereo audio output interface, all the way microphone interface.
- 1 2.0 mm pitch 10-pin JTAG interface
- 4 User LEDs
- 6 User buttons (with lead blocks)
- 1 buzzer PWM control
- 1 adjustable resistor, analog-to-digital converter for A/D test
- 1 I2C-bus AT24C08 chip for I2C but test
- 1 2.0 mm pitch 20-pin camera interface
- On board real time clock battery.
- Power interface (5V), with power switch and indicator light.
- Expansion Interface :
- 1 34-pin 2.0 mm GPIO interface
- 1 40-pin 2.0 mm system bus interface
- Operating System Support :
- Linux 2.6.29
- Windows CE .NET 5.0
- Android 2.0
- Addon Cards (Optional) :
- Wi-Fi Module 802.11
- GPS Module
- RF-ID Module
- Servo Motor Module
- USB Camera Module
- Blue Tooth Module
- DAC (8 bit)
- Seven Segment Display
Note : Specifications can be changed and added without notice in our constant efforts for improvement.