Our firm is an expert in exporting and supplying Embedded Trainer Kit (ET-ARM9). The Embedded Trainer Kit (ET-ARM9) offered by us is an Arm9 based Embedded Trainer Kit. The Embedded Trainer Kit (ET-ARM9) offered by us comes with U-Boot Boot Loader and Embedded Linux pre-installed in FLASH.

Specifications

• AT91RM9200 ARM9 MCU with 180 MHz
• 16 MByte Flash ROM
• 32 MByte SDRAM
• 10/100 Mbps Ethernet
• 1x USB Host
• 1x USB Device
• 1x RJ45, 4x16 LCD, 4x key, 2x LED, MMC holder
• 2x 9 pin Sub-D connector
• Power supply & Null-modem cable
• Embedded Linux (Developer Version)
• Botflies with Kernel Source Code
• TCP/IP Stack and Embedded Web Server
• CD-ROM with datasheets, application notes and network drivers
• GNU C/C++ Cross Compiler, GNU Tools

Key Features

• 180 MHz AT91RM9200 with 180 Mhz and 16 Mbytes FLASH
• 32 Mbytes SDRAM, 3.3 VDC Vcc
• U-Boot Boot Loader and Embedded Linux pre-installed in FLASH
• Evaluation Board
• Nullmodem Cable
• 110 VAC or 230 VAC to 5 VDC International Power Supply
• Embedded Linux with Source
• GNU Cross Tool Chain for C/C++ Software Development
• Linux Remote Login with Telnet
• Web Server Setup Sample
• FTP Server Setup Sample
• Pre-installed GSM/GPRS Modem
• Many Source code Samples

On-Board Interfaces

• Six Seven Segment Displays
• Stepper Motor Controller Interface
• LCD Display Interface
• ASCII Keyboard Interface
• 8x8 LED Interface Block
• Matrix Keyboard Interface
• Printer interface
• EWSN Status LEDs 12 Nos.
• 8 Channel ADC Interface
• Four Data Switches
• Switch Array
• At24C16 Serial EEPROM