Embedded Trainer Kit (ET-PIC84)

We are a chief Exporter and Supplier of Embedded Trainer Kit (ET-PIC84). Embedded Trainer Kit (ET-PIC84) has been designed by using Microchip PIC16F84 Microcontroller. This controller provides in-system as well as in circuit programming so that one may be able to write program and download directly in the controller through serial port without removing it from the system.

System Details

• CPU : Microchip PIC16F84 Microcontroller
• 16x2 LCD module
• Six Seven Segment Displays
• 8x8 LED Matrix Display
• EWSN Status LED's 12 Nos.
• ADC/DAC Interface
• Four Data Switches
• Switch Array
• At24C16 Serial EEPROM
• Stepper Motor Controller Interface

High Performance RISC CPU

• Only 35 single word instructions to learn
• All instructions single cycle except for program branches which are two-cycle
• Operating speed :

• DC - 20 MHz clock input
• DC - 200 ns instruction cycle
• 1024 words of program memory
• 68 bytes of data RAM
• 64 bytes of data EEPROM
• 8-bit wide data bytes
• 14-bit wide instruction words
• 15 special function hardware registers
• Eight-level deep hardware stack
• Direct, indirect and relative addressing modes
• Four interrupt sources :

• External RB0/INT pin
• TMR0 timer overflow
• PORTB interrupt on change
• Data EEPROM write complete

Peripheral Features

• 13 I/O pins with individual direction control
• High current sink/source for direct LED drive

• 25 mA sink max. per pin
• 25 mA source max. per pin
• TMR0 : 8-bit timer/counter with 8-bit programmable prescaler