USB Data Acquisition System
Home Products Data Acquisition System USB Data Acquisition System
|
|
USB Data Acquisition System
VPL-DAS-5412
VPL-DAS-5412 is a USB based data acquisition and control module which provides analog to digital, digital to analog, digital input/output, optically isolated digital input/output, relay drivers and other functions.
SPECIFICATIONS
Analog Input
No. of input channels : 16 single ended, 8 differentials
Analog resolution : 12 bits, 1 is 4096
Input type : Unipolar, Bipolar
Analog input : 0-5V, 0-10V, +5V, +10V
Analog Output
No. of DAC : 2
Type of DAC : 12 bit
Output voltage range : 0-5V, 0-10V, +5V, +10V
Digital Input/Output
I/O lines : 8
Relay driver lines : 8 with LED indicator
Optically isolated lines : 2 inputs, 2 outputs
Externally latched lines : 8
Compatibility : TTL compatible
Input/Output Connectors
ADC/DAC interface : 26 pin FRC connector
DIO lines : 50 pin burg strip connector
Communicates with PC through USB port
Data Acquisition
Sampling rate : 100K samples/sec (single channel)
VPL-DAS-5411 USB Based Data Acquisition System
FEATURES
Timer & I/O Lines
48 programmable I/O lines
Three Channels of 16 bit Timer/Counter expandable to six channels with a count rate of 2/10 MHz
Hardware clock selection for Timer/Counter
Opto Input/Output Lines
8 Optically isolated input lines (optional)
8 optically isolated output lines (optional)
Isolation voltage is more than 1500V.
Input voltage range of 0-25V (for optical input).
High speed immunity (Optical I/O)
0 - 3V is treated as logic low
3 - 25V is treated as logic high
Frequency response upto 10KHz (Optical I/O)
VPL-DAS-5410 USB based 16 Ch A/D Module
FEATURES
Resolution : 12 bit
Channels : 16 single-ended or 8 differential
Input Range : +/-150mV,+/-500mV,+/-1V,+/-5V,+/-10V,+/- 20mA
Sampling rate : 90 K/s
Interface : USB
VPL-DAS-5413 USB based Stepper Motor Controller
FEATURES
Independent and simultaneous operation of upto three motors.
Programmable step rate from 4 msec. to 1 sec. per step.
Number of steps per command range from 1 to 9999.
Built in acceleration/deacceleration control.
Software Control for clockwise & anti clockwise movement.
Easy step position monitoring.
PC interface through USB Port
|
| |
|
|
Products
