|
|
 |
|
PC Based Distributed Control System Trainer
 Home Products Data Acquisition System PC Based Distributed Control System Trainer
|
|
Basic unit has the following protocol converters:
RS-232 TO RS-485 CONVERTER
Input: RS-232 protocol
Output: RS-485 protocol
Self Tuner inside
Speed : 300115.200 bps
256 modules in one RS-485 network without Repeater
3000V isolation
Multiple Baud Rate, Multiple Data Format
Communication distance:
- 2.1Km/9600 bps
- 2.7Km/4800 bps
- 3.6Km/2400 bps
RS-232 TO RS-422/485 CONVERTER
Input : RS-232 protocol
Output : RS-422/485 protocol
Self Tuner inside
Speed : 300115.200 bps
256 modules in one RS-485 network without Repeater
3000V isolation
Multiple Baud Rate, Multiple Data Format
Communication distance:
- 2.1Km/9600 Bps
- 2.7Km/4800 Bps
- 3.6Km/2400 Bps
8-CHANNEL ANALOG INPUT MODULE
Analog Input type : mV, V or mA
Input Range: +/-15mV, +/-50mV, +/-100, +/-500mV, +/-1V, +/- 2.5V, +/-20mA
Channels : 6 differential, 2 single-ended or 8 differential (jumper selectable)
Sampling rate : 10 samples/sec
8-CHANNEL THERMOCOUPLE INPUT MODULE
Analog input type : Thermocouple, mV, V or mA
Input Range : +/-15mV, +/-50mV, +/-100, +/-500mV, +/-1V, +/- 2.5V, +/-20mA
Thermocouple type : J, K, T, E, R, S, B, N, C
Sampling rate : 10 samples/sec
Programmable Hi/Low alarm
Channels : 6 differential, 2 single-ended or 8 differential (jumper selectable)
GUI BASED WINDOWS COMPATIBLE SOFTWARE
Original licensed version with Hardware Lock
User can do required analysis with the use of following modules
Input
- Analog Input
- Digital Input
- RS-232 Input etc.
Display
- X/Y Chart
- X/t Chart
- Chart Recorder
- Digital Meter
- Bar Graph
- List display
Files
- Read Data
- Write Data
- Back-up Data
- Retrieve Data
A/I multi-speed
Data can be stored in various file formats for further analysis:-
- MS Excel format
- Graphical format
- List format
- Text format etc.
OPTIONAL EXPERIMENTAL MODULES
These modules can be attached or detached as per users requirement.
LIFT CONTROL
Experimental model of lift which is truly operational, totally controlled by manual switches to select the floors, set the priority through the program logics.
WATER TANK LEVEL CONTROL & REACTION VESSEL
Sensors to detect different levels of water and switch off the water supply (Logic Controlled). This Module is provided along with the water tank and sensors, required accessories Control the temperature of water set by the Thermostat at a particular temperature by the user.
FAN CONTROL SIMULATOR
Controls the speed of fan at various steps. This module should be provided along with SMPS Fan as an experimental model and switch to be provided to change the speed of the Fan.
SEQUENTIAL SWITCHING OF MOTORS
Sequential switching of motors with two nos. of 220V AC/5A output to connect motor (motor not provided)
SEVEN SEGMENT DISPLAY
Simulator for displaying a message.
PICK & PLACE CONTROL
Using electromagnetic relays to control the displacement and energization of electromagnet to pick a small object and place it at the destination as per the logics made.
|
| | |
|
|
Products
