Function Generator
Home Products Measuring Instruments Function Generator
|
|
FEATURES
Frequency range from 0.01Hz to 1 MHz.
Crystal-based stability.
Optically isolated from the PC.
Low sine wave distortion.
TTL level synchronization output.
Stores up to 32K of waveform points.
Standard waveforms: Sine, Square, and Triangle.
Predefined library waveforms included: Noise, Sweep.
Extended bode plot option together with PC scope.
You can create your own waveforms with the integrated signal wave editor.
Can be chained with PC oscilloscopes to the same PC printer port (LPT1, 2 or 3).
SPECIFICATIONS
Power supply : Standard 12V DC adapter,800mA (PS1208).
Direct Digital wave synthesis (DDS), 32K wave table.
Frequency setting resolution: 0.01%.
Amplitude range: 100mVpp to 10Vpp @ 600 Ohm load.
Amplitude resolution: 0.4% of full scale.
Offset : from 0 to -5V or +5V max. (resolution 0.4% of full scale).
Vertical resolution : 8 bits (0.4% of full scale).
Maximum sample rate : 32MHz.
Typical sine wave distortion
(THD): < 0.08% (with 0dB and <100 Khz, 1v RMS)
Output impedance : 50 Ohm.
Dimensions (wxdxh):235x165x47mm
SYSTEM REQUIREMENTS
IBM compatible PC
Windows 95, 98, ME, (Win2000 or NT possible)
SVGA display card (min.
800x600)
Free printer port LPT1, LPT2 or
LPT3
CD Rom player
LIBRARY FUNCTIONS (LIB)
This mode can be found by clicking the More Funct. button and then the LIB button. A set of library waveform files are included on the disk.
FOLLOWING FILES ARE EASY TO MODIFY WITH WAVE EDITOR
BURST01.LIB : Sine burst (Only 21 data points)
PULSES1.LIB : Pulses of different amplitude
RECT1.LIB : Rectangular pulse (Easy to change duty cycle with Wave
Editor)
SAW1.LIB : Sawtooth wave
SINE1.LIB : Sine wave (Only 21 data points)
STAIRS1.LIB : Stairs wave
TRAP1.LIB : Trapezoidal wave
TRI_SKW.LIB : Triangle wave with skew
TRI1.LIB : Triangle wave
|
| |
|
|
Products
