Embedded Trainer for Motorola 68HC11
Home Products Embedded Lab Embedded Trainer for Motorola 68HC11
|
|
VPL-ET-Motorola Embedded Trainer for Motorola 68HC11
GENERAL DESCRIPTION
Embedded Trainer has been designed by using Motorola 68HC11 PLCC Microcontroller. This controller provides in-system as well as in circuit programming so that one may be able to write program and download directly in the controller through serial port without removing it from the system.
SYSTEM SPECIFICATION
CPU : Motorola 68HC11 Microcontroller
16x2 LCD module
Six Seven Segment Displays
Stepper Motor Controller Interface
8x8 LED Matrix Display
EWSN Status LED's 12 Nos.
ADC/DAC Interface
Four Data Switches
Switch Array
At24C16 Serial EEPROM
Peripheral Features
M68HC11 CPU
Power-saving stop and wait modes
0, 256, 512, or 768 bytes of on-chip RAM, data retained during standby
0, 12, or 20 Kbytes of on-chip ROM or EPROM
0, 512, or 2048 bytes of on-chip EEPROM with block protect for security
2048 bytes of EEPROM with selectable base address in the MC68HC811E2
Asynchronous non-return-to-zero (NRZ) serial communications interface(SCI)
Additional baud rates available on MC68HC(7)11E20
Synchronous serial peripheral interface (SPI)
8-channel, 8-bit analog-to digital (A/D)converter
16-bit timer system:
Three input capture (IC) channels
Four output compare (OC) channels
One additional channel, selectable as fourth IC or fifth OC
8-bit pulse accumulator
Real-time interrupt circuit
Computer operating properly (COP) watchdog system
38 general-purpose input/output (I/O) pins:
16 bidirectional I/O pins
11 input-only pins
11 output-only pins
DAUGHTER BOARDS AVAILABLE
Board for Microchip PIC16F876/16F84
Board for CPLD 95108 PLCC84
Board for Xilinx Spartan XC2S50 (50 K Gates)
Board for Xilinx Spartan XC2S100 (100 K Gates)
Board for Xilinx Spartan XC2S200 (200 K Gates)
|
| |
|
|
Products
