Data Acquisition Software
Home Products Data Acquisition System Data Acquisition Software
|
|
Data Acquisition Software
DasyLab
Data Logger
With just one function module, DASYLab works as a high speed data logger, able to acquire data at speeds up to 1MHz storing them onto hard disk using the built-in disk streaming function.
Multi-channel Chart Recorder
Two function modules create a paperless. multichannel chart recorder with many options to adapt the displayed charts to your own needs.
Two-channel Oscilloscope
Use the Y/t chart display module to visualize "fast" data. DASYLab is just as simple to use as an oscilloscope, with continuous online data acquisition and visualisation at speeds up to 250 kHz.
Trigger Monitoring
You can continuously monitor a signal with one of the many DASYLab Trigger modules. The TTL-level output signals are useful in many control applications or can simply control the data flow in the program.
Frequency Analyzer
Complex signal analysis is quickly configured using some of the Easy-To-Use function modules. Just add a FFT module to the oscillocope setup, and you have a Frequency Analyzer.
Frequency Maximum
If the maximum frequency in your frequency spectrum is of interest to you, just enlarge the DASYLab .Frequency Analyzer. with an additional Y/t chart module, Statistics module and a Digital Meter module. Instantly, your Signal and the frequency spectrum are shown as charts, and the maximum frequency is displayed as a digital value.
Reference Curve Monitoring
If you need, for example, to check the thermal response using a predefined temperature curve, DASYLab provides the Sequence Generator module, the Check Reference Curve module and the Digital Output module - all suitable instruments for this type of control application.
Interfaces
In addition to hardware drivers used to access the specific hardware devices of different manufacturers DASYLab offers also several standard interfaces such as RS232, GPIB, DDE and CAN.
IVI
Data acquisition and control with IVI compatible devices. Support of the classes Oscilloscope, Digital Multimeter and Frequency Generator.
OPC 2.0
Write and Read access to tags in OPC Server with the specification 2.0.
Hardware
DASYLab supports DAQ hardware from the
following:
adac Corporation
ADDI DATA
ADLink
Multifunctional DAQ Driver
ADLink
NuDAM Driver
Advantech
Multifunctional DAQ Driver
Advantech
ADAM Driver
ADTEK System Science
Analog Devices
Analogic
Acqutec
Axiom
BMC Messsysteme GmbH
Contec Microsystems
CyberResearch
Data Translation
Data Electronics/Datataker
DEWETRON
DGH
Eagle
Elan
Ernst Gerätebau
µ-Epsilon
GaGe
Goldammer
GW Instruments
IBR Messtechnik
IED
Ines GmbH
Innovative Integration
Intelligent Instrumentation
IOtech Inc.
Keithley/Metrabyte
Measurement Computing (ComputerBoards)
Measurement Systems
Microstar Laboratories
National Instruments
Omega Engineering
Quatech
Phoenix Contact, Interbus S
Siemens
Solartron
Softing
SORCUS Computer GmbH
Spectrum
STAC
TEAC
UEI
ICP-CON
Facility to write own driver.
DASYLab Net
This powerful extension of DASYLab is able to communicate with and control remote copies of DASYLab Net on any network that uses the TCP/IP Protocol. DASYLab is able to:
Exchange data at rates up to 100 000 samples per second.
Display messages to other running DASYLab programs.
Remotely start, stop and load experiments, including simultaneous start of several DASYLab Net systems.
Password protect client server/access.
Automatic time zone correction on server and client, if different.
Run under Windows 98 and Windows 2000 / NT.
|
| |
|
|
Products
