|
|
 |
|
Data Acquisition Modules
 Home Products Data Acquisition System Data Acquisition Modules
|
|
Labview / Dasylab / Easylab Based Data Acquisition Modules
I-7520 RS-232 to RS-485 Converter
I-7520R RS-232 to RS-485 Converter
Input : RS-232 protocol
Output: RS-485 protocol
Self Tuner inside
Speed : 300115.200 bps
256 modules in one RS-485 network without Repeater
3000 V isolation
Multiple Baud Rate; Multiple Data Format
Communication distance : 2.1Km/9600 Bps
7520R is the best choice for PLC user
I-7520A RS-232 To RS-422/RS-485 Converter
Same as I-7520A, except the power side is different
I-7021/7022/7024 Analog Output Module
Analog output type : mA, V
Output Range : 0-20mA, 4-20mA, 0-10V
Accuracy : +/-0.1% or FSR for current output +/- 0.2% or FSR for voltage output.
Programmable Output Slope : 0.0625 to 64V/sec. 0.125 to 128mA/sec.
I-7050 Digital I/O Module
Digital input channels : 7
Level : TTL, Logic Level 0 : +1V max.
Logic Level 1 : +2.4 min.
Digital output channels : 8 Open collector to 30V, 30mA max. load
Power dissipation : 300mW
I-7014/D Analog/Transmitter Input with LED Display
Analog input type : V, mV, mA
Input Range : +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V, +/ -20mA.
Sampling rate : 10 samples/sec.
Isolated loop power : +15Vdc
Input Linear Scaling
LED indicator : 4 1/2 digit readout
I-7016/7016D/7016P/7016PD Strain Gauge Input Module
Resolution : 16 bit
Channel : 2 channel (I-7016/I-7016D)
Channel : 1 channel (I-7016P/I-7016PD)
Input type : mV and mA
Input range : +/-15mV, +/-50mV, +/-100mV, +/-500mV, +/-20mA
Isolation : 3000V
Sampling rate : 10Hz
I-7016/I-7016D for 4 wire
I-7016P/I-7016PD for 6 wire
I-7060 Relay Output & Isolated Digital Input Module
Input : 4 single-ended
- high level : 3.5V to 30V.
- Low level : 0 to 1V.
Isolation voltage : 5000V rms
Input resistance : 3K.
Output: 4-channel relay
I-7015/7033 RTD Input Module
No. of channels : 5 (3 Ch. for I-7033)
Analog Input type : Pt or Ni RTD
Pt 100 input range : +/-100°C, 0-100°C, 0-200°C, 0-600°C.
Ni input range : -80-100°C, 0-100°C
Sampling rate : 10 samples/sec
Input connection : 2, 3 or 4 wires
I-7017 8-channel Analog Input Module
Input Range : +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V, +/-20mA
Channels : 6 differential, 2 single-ended or 8 differential (jumper selectable)
Sampling rate : 10 samples/sec
I-7018 8-channel thermocouple input module
Input Type : Thermocouple, mV, V or mA
Input Range : +/- 15mV, +/- 50mV, +/-100, +/- 500mV, +/-1V, +/- 2.5V, +/-20mA
Thermocouple type : J, K, T, E, R, S, B, N, C
Channels : 6 differential, 2 single-ended or 8 differential (jumper selectable)
Sampling rate : 10 samples/sec
I-7080 Counter/Frequency Input Module
Counter input : 2 independent 32 bit counter.
Frequency input : 100K Hz max
Input : 3750V isolated or non-isolated
Non-isolated programmable threshold value Programmable digital noise filter
LED indicator : 5 digit readout (1-7080D)
OTHERS
Power Relay O/P Module
Transmitter I/P Module
Strain Gauge I/P Module
WIRELESS MODEMS and ANTEENA
AC SCR and Isolated Digital
DC SCR and Isolated digital I/P
Control frequency I/P Module.
|
| | |
|
|
Products
